HASUH Pump Gate®, completed in Uijeongbu-city, Gyeonggi-do, Korea

Project               : Shinheung Village Pump Station
Pump Capacity  : Ф500mm x 34cmm x 3mH x 3ea
Contract Period : 2008. 05. 09 ~  07. 18
Location            : 92 Uijeongbu-dong, Uijeongbu-city, Gyeonggi-do, Korea

 

                            Civil rebar work is under way for outlet water way from pump gate.

          Erection of the guide frame for the pump gate is completed from bottom beam to upper beam.

   

        Pump is already mounted on the gate prior to the installation of pump gate into the guide frame.
        Flap valves are also attached to the outlet flange of the pumps. It is quite rare to mount three (3)
        pumps on a gate.

                           Actuator is lowered on the frame at the top of the concrete structure.

       Spindle cover is put on the spindles and the local control panel is positioned beside the actuator.

      A simple type of screeen is installed at the inlet of the pump gate in order to filter the debris for
      the safe pump operation.


   

                               Actuator cover is opened for a check prior to the trial operation.

                                      Pump is discharging the inside water at the trial operation.

      The side view shows the actuator in the left and the small housing for the local control panel in
       the right at the top of the structure.

      Safe fence is installed just at the outlet of the pump gate in order to prevent the access. Robochain
      for the pump control/ power cables is hung in the middle from the top platform to the pumps on
       the gate.